Shaper Tool Tray - Mid Size
I wanted all my most commonly used tools group together when using Shaper Origin in a single tray. This project was inspired by https://hub.shapertools.com/creators/61f83a7df3d78d001284c52e/shares/6211864b5963eb001cfa5f8e
> 2 hr
Easy
24
Storage & Organization
Files Included (1)
shaper-tool-tray-mid-size.svg
694 kB
Materials
18 mm wood of own choice (290x225 mm)
Tools
3 mm and 6 mm cutting bits, 8 mm recommended for the larger pockets
Instructions
Straight forward cutting, play a bit with the offset to make it a good fit. Adjust to your own toolset (once Shaper Trace is released this will be easier, esp. for the caliper and scissors). I used 15 mm as I had an offcut piece readily available but would recommend 18 mm as cutting depths are getting borderline.