Mid-Century Modern Lounger
This is a beautiful lounger chair that is comfortable, sturdy, and timeless. I made mine out of 3/4" walnut but I would suggest using 1" thick material in the future. (If you do, remember to adjust the design details).
483
Furniture
Files Included (28)
Mid-Century Lounger Body Part 1 .svg
19 kBMid-Century Lounger Body Part 2.svg
33 kBMid-Century Lounger Body Part 3.svg
4 kBMid-Century Lounger Chair Mortis G.svg
2 kBMid-Century Lounger Cx.svg
5 kBMid-Century Lounger Dx.svg
5 kBMid-Century Lounger I.svg
5 kBMid-Century Lounger Ix.svg
4 kBMid-Century Lounger J.svg
4 kBMid-Century Lounger Jx.svg
4 kBMid-Century Lounger K.svg
4 kBMid-Century Lounger Kx.svg
3 kBMid-Century Lounger L.svg
4 kBMid-Century Lounger Lx.svg
4 kBMid-Century Lounger Mortis A.svg
7 kBMid-Century Lounger Mortis Ax.svg
7 kBMid-Century Lounger Mortis B.svg
5 kBMid-Century Lounger Mortis Bx.svg
5 kBMid-Century Lounger Mortis C.svg
5 kBMid-Century Lounger Mortis D.svg
6 kBMid-Century Lounger Mortis E.svg
1 kBMid-Century Lounger Mortis Ex.svg
1 kBMid-Century Lounger Mortis F.svg
1 kBMid-Century Lounger Mortis Fx.svg
1 kBMid-Century Lounger Mortis Gx.svg
2 kBMid-Century Lounger Mortis H.svg
1 kBMid-Century Lounger Mortis Hx.svg
1 kBMid-Century Lounger Simplified Tie.svg
1 kB
Materials
3/4" Walnut and some glue
Tools
Origin Shaper
Sander
Spindle Sander
Clamps
Instructions
1. Use the "body" files to optimally layout the pieces on the boards. (I took pictures of the boards and placed them in the design files so that I could optimize the grain and avoid imperfections. 2. Cut out all the pieces with the Origin 3. Cut in all mortise and tenons 3. Sand and smooth all pieces (a spindle sander helps here) 4. Fit and glue each of the sides 5. Cut and place the bow ties in the arm rests with the Origin 6. Complete the remaining assembly 7. Finish with OSMO Polyx Oil 8. Upholster