W/E Rocker
Rocker made out of plywood. Back and Seat are a repetitive piece cut; glued together with pieces in ellipse form between each other.
> 2 hr
Intermediate
471
Furniture
Files Included (4)
Back-Seat.svg
15 kBEllipse.svg
700 BRail.svg
595 BRocker.svg
4 kB
Materials
48" x 96" Plywood
Tools
Shaper Origin, Sanders, Wood Oil of preference (I used Rubio Monocoat Chocolate), Glue, Mallet, Chisels. Nail air gun (nails 1"), Clamps.
Instructions
The width of the Rocker will be determine by your liking. I did mine 18 1/8" (15 pieces). The rail will be resize depending on rocker width. The pieces for the back and seat have an ellipse pocket (1/8") on one side, it helps to align all together. Once you cut them all it is pretty straightforward process to assemble. Ellipse pieces are 2" x 1 1/4". Pockets are 2" x 1 1/4" with an offset of .004.