Sawstop PCS Insert Created by ZootFenster — 5W x 18L blank, 1/2" thick. Works in 0 degree orientation. May not work at 45 degree full blade depth. Front screw is M10x1.5 (M5 hex). Six side screws are M6x1.0 Two short screws go on side / front for tight fit. Adjust hole diameter. 1/2 mm smaller for plywood (design). Use Blue Loctite on screws.

Share

Sawstop PCS Insert

Share

by David Giles

Shared March 22, 2026

5W x 18L blank, 1/2" thick. Works in 0 degree orientation. May not work at 45 degree full blade depth. Front screw is M10x1.5 (M5 hex). Six side screws are M6x1.0 Two short screws go on side / front for tight fit. Adjust hole diameter. 1/2 mm smaller for plywood (design). Use Blue Loctite on screws.

BY-NC-SA 4.0 License

Made by Shaper Tools

Terms & Conditions

Intellectual Property

© ShaperHub & Shaper Tools, Inc. all rights reserved