Mirka RS 600 Insert Created by Toolguy.dk — Inlay for Mirka Deros RS 600 that enables the machine to be stored with the outer ring on the machine. The outer box frame is just for my alignment, it should not be cut. The inlay was made on the foam inlay in the customizable systainer from Shaper.

Share

Mirka RS 600 Insert

Share

by Toolguy.dk

Shared January 6, 2026

Inlay for Mirka Deros RS 600 that enables the machine to be stored with the outer ring on the machine. The outer box frame is just for my alignment, it should not be cut. The inlay was made on the foam inlay in the customizable systainer from Shaper.

BY-NC-SA 4.0 License

Made by Shaper Tools

Terms & Conditions

Intellectual Property

© ShaperHub & Shaper Tools, Inc. all rights reserved