3D Printer Filament Spool Cleat - End Created by FunkyWoodWorkshop — If you need storage for 3D printer filament, this template will give you French cleat compatible storage. Supply your own dowels, the holes are 1" so adjust accordingly. Spools are about 8" in diameter, and this design is 8x8 with an additional 1/2" depth for the hook to the cleat wall.

3D Printer Filament Spool Cleat - End

by FunkyWoodWorkshop

Shared December 22, 2025

If you need storage for 3D printer filament, this template will give you French cleat compatible storage. Supply your own dowels, the holes are 1" so adjust accordingly. Spools are about 8" in diameter, and this design is 8x8 with an additional 1/2" depth for the hook to the cleat wall.

BY-NC-SA 4.0 License

Made by Shaper Tools

Terms & Conditions

Intellectual Property

Careers

Help & Support

.css-1cnrqgp:visited{color:#4a4a4a;}BY-NC-SA 4.0 License

BY-NC-SA 4.0 License