360 Sled With Pins Created by supergimp — Cut Path for creating a 20x16 360 Matchfit Sled with locating Pins at 0, 22.5, 30, and 45 degrees. Cut first with Matchfit 1/4" bu=it and then follow with Matchfit Dovetail Bit.

Share

360 Sled With Pins

Share

by Steve Thompson

Shared March 4, 2025

Cut Path for creating a 20x16 360 Matchfit Sled with locating Pins at 0, 22.5, 30, and 45 degrees. Cut first with Matchfit 1/4" bu=it and then follow with Matchfit Dovetail Bit.

BY-NC-SA 4.0 License

Made by Shaper Tools

Terms & Conditions

Intellectual Property

© ShaperHub & Shaper Tools, Inc. all rights reserved