Share
Wave Trivet
Share
by Josh Worley
Shared November 13, 2024
Simple wave-shaped trivet with offset grooves. Try cutting the grooves with a straight flute 6mm router bit, a v-bit, or a ball nose bit for different outcomes.
BY-NC-SA 4.0 License
Updates
November 13, 2024
Added cut depths for guidance. I suggest cutting from approx 20mm think material. The grooves can be cut to your desired depth but I'd recommend about half the material thickness

Made by Shaper Tools

© ShaperHub & Shaper Tools, Inc. all rights reserved