18” Stool
Yes, another stool, four legs, compound angles and the legs are square to each other.
6
Furniture
Files Included (7)
18 inch Stool Instructions.pdf
1 MBArchive.zip
802 kBLegTenon_18Inch.svg
1 kBLowerRungMortise_18InchV2.svg
4 kBRungTenon_18InchV2.svg
1 kBSeat.svg
3 kBUpperRungMortise_18InchV3.svg
4 kB
Materials
Legs: 4 legs at 1.5” square, 22” long which is oversized.
Rungs: 4 rungs at 1.5” x 1”, 12.5” long which is oversized.
Seat: 12” x12” x 1.25” thick, start oversize
Tools
Shaper Origin
Shaper Workstation
Shaper Tape for shop made tape board
1/4” router bit, 1 1/2” cutting length
Router Table
Router
Round over bit, your choice
Material prep tools
3D Printed parts (in zip file)
V-Block for Workstation
Instructions
This is a fun project and after your material is prepared the mortise and tenons are quickly done with Origin. Material list is for one stool. A you can see by the pictures I built two. One is white pine 2x4 material and the other is cherry with purpleheart splines at the seat corners for accent. I chamfered and coved the legs/rungs for more detail. More details in the instructional pdf.