Makita RT0701C Router Base
Pretty common trim router. This is an acrylic base plate you can use with the tool. It's for model RT0701C. Uses the existing screws that come with the router. The plate in the attached SVG is centered at 2.5 inches (each side).
20 min
Easy
6
Tools
Files Included (1)
makita-rt-0701-c-router-base.svg
46 kB
Materials
Cast acrylic (1/4 or 3/8) approx. 6" X 6" or larger dimension.
Tools
⅛” X ½” Up-Spiral O-flute Router Bit or similar acrylic router bit
Engraving Bit
Instructions
Cuts on the workstation. Some Shaper Tape, a grid, set up depths based on your material's thickness, and cut away.