Sliced Water Art
Wave design art using shaper origin to carve segmented relief of water
> 2 hr
Advanced
109
Decor
Files Included (1)
PP6 1767x762x100.svg
631 kB
Materials
3/4 Sapele Plywood
Osmo Finish
Tools
- Shaper Origin
- Down cut Spiral Bit with Solid Carbide Compression
Instructions
This project is worth the effort! My approach was pretty simple. Using the attached design file created one studio file for each sheet of ply. Using the double masking tape method I adhered the ply to a spoil board. Using autopass, I found the exact depth of cut and went to town! For the mount, I left the original on the file, but when I did mine I created a table saw box joint jig at 18mm. @mentalstrategy