Harvey C14 Ambassador Bandsaw Throat Plate
Replace the red aluminum throat plate in your Harvey Ambassador C14 Bandaw
1
Tools
Files Included (1)
harvey-ambassador-c-14-throat-plate.svg
5 kB
Materials
5mm Hardwood
Hardware (take from factory plate)
Tools
Shaper Origin
Hand Saw for Kerf
Countersink
3mm Tap and Drill Bit
Instructions
After using an outside cut for the overall shape and center hole, you will likely need to cut the open kerf with a handsaw, as I have done. The 3mm holes for the leveling screws will need to be done with a drill bit, unless you have a bit for your shaper that can accommodate such a small size. Use a countersink to recess the head of the cap screw on the top. I borrowed the hardware from my factory plate, but you can divine some of the hardware based upon the uploaded part schematic. NOTE: Recommend cutting with grain running the length of the plate (unlike the one on the left side of the photo).