Decent DE1 Espresso Machine Water Tank Lid
This is a water tank lid for the Decent DE1 espresso machine. This lid is meant to limit the dust that can settle in the tank during operation, particularly for machines that are plumbed in. Accomodates water intake, catering/refill kit, and hot water return.
0
Kitchen
Files Included (1)
20230930 DE1 tank lid v05.svg
5 kB
Materials
6x300x300 mm food-safe acrylic
Tools
1/8 upcut O-flute
8mm O-flute L (w/ 8mm collet)
60 deg engraving
Instructions
Cut out three port holes as through cuts, going 3 mm depth each pass. Use the smaller O-flute bit as the larger bit will not clear the ports with offset. Cut interior perimeter rectangle as Outside to 2.3 mm depth. Use a larger 8 mm O-flute if you have one, as this can be done in a roughing and finishing pass. Fewer passes with a larger bit make for a flatter surface. Cut the exterior perimeter rectangle as Outside as a through cut, going 3 mm depth each pass. Optional- Flip the workpiece and use the top-left corner to regrid the design and center the logo. Use the engraving bit to engrave the d.