CLEATUS: French Cleat 18mm accessory holder
I just wanted to have all my Shaper and Workstation accessories easy reachable and not stored away in bags so i made an all-in-one storage system. for my own take of the Workshop Cart follow me for more: www.instagram.com/d019_studio/
76
Cleats
Files Included (4)
CLEATUS_accessory_hand_guard.svg
620 BCLEATUS_accessory_Hanger.svg
2 kBCLEATUS_accessory_Plate.svg
9 kBCLEATUS_accessory_tape_holder.svg
632 B
Materials
18mm Plywood
Tools
6mm cutter
16mm Cutter (just faster)
Instructions
Cut out all the Internal features using a 6mm cutter. Optional you can use an 16mm cutter to speed up the process and hog out the Pockets for the tape holder and clamps. When you come to cut the outside contour remove the free-cut holes at first and be careful when you are passing them because the cutter likes to pull you there. I Used Auto pass with 10% roughing (The bottom left hole is 7mm and used to store the system 32 indexing pin) Base System: https://hub.shapertools.com/creators/63a6f606fbe48653c2f842e9/shares/641c29f3667686b6b68f3cc2