Triple shelf cleat - updated
Triple shelf french cleat ideal to work as a glue station. Made with friction fit mitre and tenon joinery for glue and fixing free assembly. Part of a series of 8 tool free French Cleats that I cover how to build in the linked Youtube video.
40
Cleats
Files Included (8)
2.5inF_Bracket.svg
9 kB2.5inF_Shelf.svg
1 kB3inF_Bracket.svg
9 kB3inF_Shelf.svg
1 kB60mmF_Bracket.svg
8 kB60mmF_Shelf.svg
1 kB80mmF_Bracket.svg
8 kB80mmF_Shelf.svg
1 kB
Materials
Ply stock (see parameters)
Spoil board
Reference board + Shaper tape
Double sided tape
Dowel(see parameters)
Sand paper
Tools
Shaper Origin
Appropriate cutter (see parameters)
Instructions
For a run through on how to cut this tool holder, watch the linked YT video! * If the SVGs included above are not right for your setup or if you would like to support my work then you can pick up fully parametric CNC files for this tool holder on my Etsy store: https://goto.hswdesign.co/triple-shelf-cad Parameters used in the triple shelf SVGs are: --- METRIC for 60mm and 80mm Cleat Thickness of ply used for wall cleat - 17.8mm Thickness of ply used for bracket - 14.8mm Height of cleat face - 60mm Diameter of locking peg - 16mm Offset for locking peg - 0.1mm End-mill/bit diameter - 6mm End-mill/bit offset - 1mm Shelf drop height - 580mm Shelf depth - 155mm Shelf width - 200mm Dowel diameter - 9mm --- IMPERIAL for 3" and 2.5" cleats Thickness of ply used for wall cleat - 3/4” Thickness of ply used for bracket - 1/2” Height of cleat face - 3” Diameter of locking peg - 1/2” Offset for locking peg - 0.005” End-mill/bit diameter - 1/4” End-mill/bit offset - 0.02” Shelf drop height - 23" Shelf depth - 6" Shelf width - 8" Dowel diameter - 1/4"