JessEm Router Accessory holder
Accessory holder for a JessEm router lift. Included are files for what is pictured (together) as well as the individual components to mix and match your own.
19
Storage & Organization
Files Included (4)
Insert Wrench Holder.svg
4 kBLift Handle Holder.svg
7 kBRouter Insert Holder.svg
9 kBRouter Table Accessory Holder.svg
21 kB
Materials
I used 3/4 MDF but could have easily used 1/2 MDF or plywood as well
Tools
Shaper
5mm and 8mm bits
Keilverbinder bit
90deg engraving bit (for chamfer)
Instructions
Pretty basic cut out - Additionally, I used the 90 deg engraving bit to provide a bit of a chamfer on the inside. Play around with offsets and depth to get something that you like. I used the Keilverbinder connectors (cut with Shaper Plate) to attach to a small ledge on the side of the router table (mainly because I just got the connectors and bit and was itching to try it out)