Cleat - Bit Holders
Cleat shelf to hold two magnetic bit holders. I've had these magnetic bit holders for a while but they were sitting on shelves or worktops. I finally got around to building a quick french cleat shelf to house them and get them out of the way. Link to product on Amazon: https://www.amazon.com/Neiko-02449A-Magnetic-Organizer-Adapter/dp/B078Z3RDWW/ref=sr_1_1_sspa?crid=3RHYJLV3HUFBK&keywords=neiko+bit+holder&qid=1686774153&sprefix=neiko+bit+%2Caps%2C242&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&
7
Storage & Organization
Files Included (2)
Bit Holder Shelf.svg
4 kBBit Holder Side.svg
26 kB
Materials
1/2 Plywood
Tools
Shaper
5mm and 16mm bits for speed but standard 1/4 bit can be used
Instructions
1) Build two shelves first 2" x 8.5" 2) Sneak up on cutouts in shelf sides to ensure a tight fit (mine ended up being perfect with 0 offset) 3) Finish as needed - I probably will go back and do a slight round over Note: they bit holders have a slight tendency to top forward. I fixed it with double sided tape for now but might use hot glue