Toolcart for Shaper Workstation with small footprint
26
Shaper Workstation
ShaperWorkstationFrontView.png
ShaperWorkstationTop.svg
ShaperWorkstationTopView.png
Multiplex/Plywood 15mm:
Sides: 842x378
Back: 857x546
Floor: 546x378
Inner walls for Systainer: 560x378
Front covers Systainer: 560x43
Systainer shelf: 400x378
Systainer top: 516x378
Workstation Shelf: 516x330
Multiplex/Plywood coated white 18mm:
566x403
(All measurements in mm)
Table Saw
Cordless screwdriver
As i wanted a small toolcart for my shaper workstation but only found carts with a "big footprint" i created my own. I cut all the pieces listed in "Material" out of 15mm Multiplex (Except for the Top plate which i made out of 18mm white coated multiplex). Then i just screwed the pieces together. I mounted the workstation on rollers with a height of 17mm which makes a total height of 95cm for the cart. I cut the top sheet with shaper origin and also added cutouts for the Wrench and some 8mm router bits. I also drilled a 5.5mm hole for the shaper 4mm allen key.
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved