T-Loc Systainer Inserts for 2' x 4' polyethylene
Template for cutting out polyethylene Systainer inserts, which fit T-Loc series (not Sys3)
1 hr
Intermediate
28
Hardware Inserts
Files Included (1)
Systainer inserts on 2x4 sheet of polyethylene.svg
105 kB
Materials
2" x 24" x 48" cross linked polyethylene
Tools
Origin
Smallest diameter end mill that can cut 51mm (may have to do more than one pass) - may have to be 5mm end mill.
Instructions
Cut depth should already be 51mm deep for 50.8mm (2 inch) workpiece. Put shaper tape on where the pads will remain so you can cut out the rest Grid may help - place at x = 0, y = 0