4 1/2" Ribbon Pull
By Darrell5|BY-NC-SA 4.0 License|Updated November 21st, 2023
This is a smaller version of the Ribbon Pull from my Masterclass. I use smaller ones such as this for doors and small drawers.
20 min
Intermediate
13
Files included (3)
Honduras Mahogany 7/8" x 2 7/16" x 5 5/8"
Shaper Origin
- Shaper Workstation
- 1/4" Flat Router Bit
- Amana #45982 Router Bit
- Laurel Riffler Rasp
- Sandpaper
Follow the instructions from my masterclass . ( https://www.shapertools.com/en-us/masterclass/darrell-peart )
The cut depths are all the same . The only difference is the 2nd pocket is now an inside cut.