Another stepstool
Just another stepstool Mine is made from cherry, bookmatched top with epoxy cast to repair a crack in the wood I very like some character )
30
Furniture
Files Included (4)
Step Stool.f3d
399 kBstep-stool.svg
30 kBTemplate leg.svg
761 Btenon-leg.svg
6 kB
Materials
22mm board for the top and 33mm for the legs
Hardwood of your choice.
Tools
6mm bit
Woorkstation
3mm rounder bit
Instructions
Use the leg template to make a template for the bandsaw and the router table, doesn’t make sense cutting it directly on origin Imo. Than use the leg tenon file to cut the leg’s tenon on the workstation at ZERO offset. For the board I only cut the mortise and the logo with the origin (be careful choosing the correct offset depending on your mill and wood) the bigger mortise is 15mm deep and the oval one is 7mm enclosed you can find the fusion file for further reference/modifications