Wood scrap as thick as knob, ~2in
Skrew and nut
Shaper Origin
1/4 in bit
Engraving bit
Drill
Polyurethane
- Cut train pattern with engraving bit - Cur exterior to a full depth and a slight outside offset, so that edges appear beveled. This will take multiple passes with a 1/4 in bit - Flip piece, remount, and align pattern - Cut circle at depth that feels comfortable for knob, ~50% depth - Drill hole in middle and mount nut (not in pattern) - Finish with polyurethane and mount!
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved