Workstation Cover
Leaving the Workstation uncovered on the workbench for a while it will became covered in dust and small marks. I solved the problem by making a cover for the Workstation. It is mainly a table-saw/track-saw job except for the grips on the side.
16
Shaper Workstation
Files Included (2)
Side with cutout.svg
2 kBWorkstation cover Drawing.pdf
136 kB
Materials
18 mm multiplex
Tools
Table-saw or Track-saw
3 mm cutter
Instructions
Cut the multiplex according to the dimensions of the drawing. Use the SO to cut the ‘grip’ with SVG on both sides. Alternative to SVG: You can also use the on-board design function: - Place a 70 mm circle with the centre in the middle of the bottom of a side. Then copy and change the height of the circle to 35 mm. Remove the original circle. - Cut half the ellipse to a depth 6 mm. - Pocket the rest of the ‘grip’ Glue and clamp the parts together leave too dry. If you like you can add some text on the top and round the edges. Have fun….