Hillman Keyhole Fastener (#122211)
Hillman's Keyhole Fastener (#122211) is designed to be surface mounted, however, this cut file allows the fastener to be inset, permitting the project to be mounted flush with the surface.
13
Hardware Inserts
Files Included (2)
Keyhole-Fasteners-Hillman-122211.pdf
376 kBKeyhole-Fasteners-Hillman-122211.svg
21 kB
Materials
Hillman's Keyhole Fastener (#122211)
Tools
Shaper Origin
Shaper Workstation
Stock 1/4" cutter
Instructions
The point of origin for this file is the exact center of the fastener. The screw holes are indicated, "5mm O (just for reference)". 5mm is the diameter of the opening. Cutting this size will leave an opening much larger than the provided screws. These marks are useful for double checking placement of everything. After cutting the other shapes insert the fastener and use a small self-centering drill bit to drill pilot holes for the screws. The center line, likewise, is just for reference and lining things up. As indicated on the files: The large oval is cut to a depth of 4mm. Test fit after cutting as this cut will most likely require a small offset to slightly widen the hole The small oval is cut to a depth of 6mm. This hole isn't necessary, but allows space for the head of the hanging screw