12" Bosch miter saw zero clearance insert
It would be a good idea to cut a test piece to ensure you don't waste a good piece of wood incase the measurements vary slightly.
20 min
Easy
44
Shaper Workstation
Files Included (1)
12 inch bosch miter saw zero clearance plate.svg
5 kB
Materials
Your choice of wood
Tools
1/8" up cut spiral bit
workstation
Instructions
The pocket holes was cut to 3/16" depth. The insert is 3/8" thick, it may vary on yours. Length is 17 1/16" Width is 3 5/32" I cut the outside using a 0.02 negative offset cut, yours could vary. Note: You might have to alter the through holes slightly with a drill bit