Vertical Wireless Charger Stand
A vertical stand for a wireless phone charger. The size is based on the wireless charger I have and for a Samsung S21
20 min
Easy
24
Electronics
Files Included (1)
Wireless Charger Stand-v4.svg
50 kB
Materials
1/2 inch plywood (0.47" Actual thickness)
Tools
1/8" router bit
1/4" router bit
Instructions
See comments on the SVG file Sizing optimized for Samsung S21 Add dogbone holes on inside corners or square inside corners with a chisel Resize the charger and wire pocket size and depth based on the wireless charger you are using.