Coasters from the heart
Here is a small gift idea for the holiday season ... Coaster from the heart, designed thanks to Shaper Labs.
10 min
Easy
48
Kitchen
Files Included (1)
Heart_coaster_(2).svg
33 kB
Materials
Whatever 85x85mm pieces you got on hand ....
The ones from the pictures are made from leftover oak veneered plywood flooring !
Tools
Shaper Origin, 3mm bit, router and quarter round bit, some sanding paper ...
Instructions
Circle: exterior cut full depth (or 6mm and then use a router with copying bit if you prefer ...) Heart outer shape and left part arcs:interior cuts Heart right small arcs part: exterior cuts Used 2mm depth for the heart. Finally did a small roundover on the edges of the circle for a smoother touch, and a little sending.