Domino Earrings

Instructions

These are cut from white 1/8'' acrylic. The dots are shallowly routed, and then I used a valve-action permanent marker to fill them black. You could alternatively use a two-tone acrylic sheet, which might go faster and have less potential for mess. A 1/8th bit will cut almost everything, except for the hole for the earring hardware, which will fit a 1/16. If need be, you can always drill that separately with a hand drill - just consider center punching first. Route the inside of the dots and the hardware hole first, then cut the outside of the domino. Since acrylic can be fragile, make sure to take several passes when cutting it out.