Marble Run Blocks

Instructions

You can configure this project depending on the size of your workpiece and your desired block size (or marble size). In general, the blocks are twice as wide as they are tall and the height should be set equal to the size of the core box router bit you choose to cut out the channel. More detailed instructions and illustrations can be found in the following PDF: Instructions https://www.dropbox.com/s/engkrha0y58b07x/MarbleRunInstructions_sm.pdf?dl=0 The included file includes guide lines to show kerf, and is for blocks that are 1'' high and 2'' wide, with a kerf of .125''. Questions or Comments? Discussion thread here. https://community.shapertools.com/t/marble-run-blocks-hello/8295/3