Router Bit Foam Systainer Insert

Instructions

No depths encoded, but I set all of the vertical holes to 35mm - seems to happily accommodate most of my 1/2 bits. The long one that's laying flat is 1/2" deep. If you leave your Origin at its default speeds the helixing can take a while - I recommend maxing out the auto speed, each hole takes maybe 8 seconds. Reduce the size of the holes a bit for a satisying pop as you pull the bits out. (Bear in mind that using the 1/4" cutter on the 1/4" holes this isn't possible, so if you want full depth and you don't have a long 1/8" bit or something, your 1/4" bits will be just a little loose). This is a helpful way to hold your workpiece while cutting: https://hub.shapertools.com/creators/59f3b9e455801f0010b90d7d/shares/6100835f211c7500113e65af