YouTube Play Button

Instructions

1. General I utilized end grain wood, although it is not deemed necessary. The dimensions of the board are 250 mm in width, 300 mm in height, and 35 mm in thickness. 2. Cutting The section of the play button that is colored red is created with the cut type: "Pocket", while the final pass is achieved using the "Inside" cut type. The depth of the cut is set to 20 mm. 3. Engraving Add your custom text, "Presented to <YouTube channel name> for passing 1.000 subscribers". You can utilize the text tool. For the cutting process, you can employ the "On line" cut type along with an engraving router bit. 4. Epoxy The section of the play button that is colored red. I applied approximately 10 mm of red epoxy. Additionally, I used white epoxy to create the text. 5. Finish I recommend sanding the surface to ensure a smooth and polished finish. Once the sanding is complete, you can proceed to apply a suitable finish of your choice to enhance the appearance and durability of the play button.