CHEESE PUZZLE
Cheese puzzle Take up the challenge! Place five pieces of cheese in a 10x10 cm square and find the perfect place for the little mouse. Can you skilfully arrange the cheese and provide the mouse with a tasty hiding place? Test your skills and experience the tricky fun!
17
Games
Files Included (8)
cheese-puzzle-coin.svg
19 kBcheese-puzzle-p-1.svg
4 kBcheese-puzzle-p-2.svg
4 kBcheese-puzzle-p-3.svg
4 kBcheese-puzzle-p-4.svg
5 kBcheese-puzzle-p-5.svg
5 kBcomponents-together.svg
39 kBFrame_Cheese_Puzzel.svg
50 kB
Materials
1x 140mm x 120mm x10mm
1x 280mm x 70mm x 5mm
Optional: black wood filler
Tools
6mm or 8mm Bit
Engraving Router Bit
Instructions
Even though puzzling has its charm, here are a few words about the files: The frame (oak in the picture) for the puzzle is milled from the 140mm x 120mm x 10mm workpiece. The 10x10cm field is milled as deep as the cheese pieces should later be thick, in the example 5mm. The space for the mouse chip is milled to the same depth. In the picture, the cheese pieces are made of ash wood. The ‘starting position’ and the lettering can then be milled in as preferred using the engraving bit. The cheese pieces with the mouse can all be found as individual files or under ‘Components together’, but you can get more out of the wood when placing them individually and, depending on the cutter diameter. If you don't like sanding or don't want to rework the corners with a chisel, you should mill the frame for the game board 0.5 mm larger. Have fun tinkering! :)