Magswitch 150
Materials
3/4" material
double sided tape
Tools
Shaper Origin
1/4" upcut spiral bit (shaper standard)
Workstation
Instructions
This works for a Magswitch 150. (sort of) It does need some finessing as I built this in Labs.Shapertools. This was the first time I used labs to design a shape and I had to use my Eye-chrometer as a measuring device as I couldn't figure out how to bring up measuring tools inside the program besides the grid the software lays out for you. To use this file, open it in your Shaper Origin and then resize both the width to 1.226" and the length to 1.577". Make sure you unlink the Width x Height. I ended up using a -.003 offset to make the final pass which allowed for a very tight fit in 3/4" walnut.