Wrench for Teknatool Nova G3 chuck 100 and 130 mm
Did not like the small key provided for releasing the chuck. So I made a bigger one, which allows it easily.
10 min
Easy
3
Tools
Files Included (2)
Schluessel Teknatool 100er Futter V2.svg
2 kBSchluessel Teknatool 130er 48cm lang.svg
2 kB
Materials
hard wood appr. 450x170 mm 10 to 12 mm thick,
also Forescolor or HPL leftovers are fine.
Tools
Shaper Origin
6mm router bit
Instructions
update: found out, that it fits good on the 100 mm chuck, the 130 mm is difficult, because the jaws are too wide in many cases, so the wrench can't be inserted. Give it a try, and if there is a better solution, please tell me!