Mirjas Weihnachtsbaum (Christmas tree)
A couple of years ago I had seen a tree like that in a window in the Italian mountains. I cut two similar trees with a jigsaw then and used a router for edge trimming. Now a new version for the SO is born. Subtitle: save the trees! This one lasts for many years!! It's dedicated to Mirja from the German ShaperTeam.
27
Decor
Files Included (5)
01_Mirjas_WeihnBaum_140x400.svg
10 kB02_Mirjas_WeihnBaum_Platte_180x19.svg
1 kB03_Mirjas_WeihnBaum_780x280.svg
35 kB04_Mirjas_WeihnBaum_Teller_260mm_18mm.svg
1 kB05_Mirjas_WeihnBaum_Fuss_Alternative.svg
58 kB
Materials
Small: Plywood abt 420 by 140 mm, 18mm
and one piece 200 by 200 for the bottom plate
Wood glue
Big: Plywood or spruce / pine abt 800 by 300 and a bottom plate with 300mm diameter.
Tools
Shaper Origin
Shaper Workstation (optional)
Router bit 6mm
Instructions
Just cut the 3 sides, they are put into the socket plate, glued and on top glue in the little triangle for stabilization. I only sanded the corners a little bit manually (grit 120). Small tree: Files 01 and 02 The bigger version is just the same, files 03 and 04, optionally you might use file 05 instead of 04 to have a smaller stand for it. The picture shows only the small variant (20mm thick), I hope I can add more in a couple of days.