Shaper work bench / station
Created a bench to use my new Shaper Origin. It is on wheels so I can move it next to my table saw for added surface as it is the same height. I use the on board computer to create the dados for all the plywood panels and the openings on the sides. I down loaded the file for the outline of the origin that I saw in a session to go on the cabinet door where the shaper is stored. The drawers are for the small tools and supplies for the Workstation and the Workstation itself.
99
Shaper Workstation
Files Included (1)
Origin_Sign.svg
12 kB
Materials
Two sheets 3/4” Maple plywood
2” walnut for all the face framing
1/4” maple plywood for the doors and drawer bottoms
Butcher block countertop 36 x 96”
Wood clamp from Rockler
3/4” poplar for the drawer frames
Epoxy for the Origin outline
Tools
Shaper Origin
Table saw
Drill
Router
Sanders
Etc.
Instructions
The design of this bench was developed by looking at other projects on shaper hub and thought I would share with others as it came out great.