V8 Beer Caddy
Beer Caddy in the shape of a V8. Published as is, feel free to modify. More pictures in the Shaper Origin Users Group on Facebook, search for "V8 Beer Caddy"
39
Kitchen
Files Included (10)
Bottle Opener.svg
6 kBBottle Rack Side.svg
3 kBBottle Racks.svg
23 kBBottom.svg
547 BFront.svg
41 kBHandle and Bottom Side.svg
3 kBHandle.svg
6 kBInside.svg
31 kBPaint Template 1.svg
21 kBPaint Template 2.svg
2 kB
Materials
2 pcs 320x330x18 mm Front and Back
2 pcs 200x15x12 mm Support legs
4 pcs 380x90x10 mm Bottle Rack
2 pcs 380x90x18 mm Handle and Bottom
1 pcs 70x50x45 mm Beer Opener
2 pcs 320x330x2 mm Paint Template
2 Bottle Opener inserts
Black Spray Paint
Tools
SO
Router to trim edges
Drill
Clamps
Screws
Glue D3 (Titebond 3 or similar)
Instructions
Front, Cut the front details first. Then flip it and cut the mortises and cut the piece out. Use a grid to place it accurate so when you flip you get the exact center. Back, Just cut the mortises and then cut the piece out. Support legs, I have no drawing for these since it's just a piece of wood. Bottle Racks, Cut the tenons first and then the holes for the bottles. Handle, Cut the tenons first. Bottom, Cut the tenons first. Bottle Opener, Adjust the measure for the bottle opener insert you get. I hope the pictures will give you an idea how a cut I cut the diagonal. Paint Templates, I used thin Masonite for them but any material will do. Paint the front. Trim edges with a router. Attach the bottle opener to the back, the attach the support legs to front and back. Glue it together and clamp it up. Have a nice and a refreshing summer!