Origin-built Lathe and Disc Sander
This is a lathe and disc sander combo you can build for your shop using your Shaper Origin. There is an included PDF in the files with all of the details and notes about using Origin to make your lathe successful.
42
Tools
Files Included (23)
25_inch_faceplate.svg
14 kB3_inch_faceplate.svg
17 kBLathe and Disc Sander made with Shaper Origin.pdf
120 kBmain_back.svg
5 kBmain_front.svg
5 kBmain_support.svg
52 kBmotor pulley large.svg
7 kBmotor pulley medium.svg
36 kBmotor pulley small.svg
31 kBmotor_mount.svg
7 kBrest_support.svg
19 kBsanding_disc_spacer.svg
19 kBsanding_disc.svg
27 kBsanding_table_corner_support.svg
5 kBsanding_table_pivot.svg
5 kBsanding_table_support.svg
11 kBsmall_knob_spacer.svg
2 kBspindle pulley large.svg
7 kBspindle pulley medium.svg
7 kBspindle pulley small.svg
6 kBtailstock_support_hex.svg
18 kBtailstock_support_round.svg
19 kBtailstock_wheel.svg
10 kB
Materials
See included PDF file for details.
Tools
Stock Origin 1/4" and 1/8" cutters
Amana 46577-k 1/4" x 1.5"LOC upcut bit
https://www.toolstoday.com/v-14289-46577-k.html
Alternative long cutter for profiling head and tailstock pieces
SpeTool 1/4" diameter 2" LOC (Origin will only use about 1.7” max cutting depth)
https://www.amazon.com/gp/product/B09M6T9221/ref=ppx_yo_dt_b_search_asin_title
Preferred cutters:
SpeTool 1/8" diameter 1" LOC
https://www.amazon.com/gp/product/B087LYV7S7/ref=ppx_yo_dt_b_search_asin_title
SpeTool 1/4" diameter 1.25" LOC
https://www.amazon.com/gp/product/B081PNGWKT/ref=ppx_yo_dt_b_search_asin_title
Instructions
See included PDF file for details and link to plans. Below are a few videos from the original plan creator Paoson to illustrate the building of this wonderful tool. Videos for Homemade Lathe & Disc Sander Parts 1-3 https://youtu.be/bsYAHJMazAU https://youtu.be/fhtTKd0-qJs https://youtu.be/w_pmExwly14