Corner Radius Metric
Corner Radius for Plate in metric. 🚨 be carful if you use a 8mm bit
10 min
Easy
32
Furniture
Files Included (11)
R10.svg
5 kBR12,5.svg
5 kBR15.svg
5 kBR17,5.svg
5 kBR20.svg
5 kBR22,5.svg
5 kBR25.svg
5 kBR27,5.svg
5 kBR30.svg
5 kBR5.svg
5 kBR7,5.svg
5 kB
Materials
Whatever you want
Tools
Shaper Origin
Plate
6mm long reach cutter
https://www.shapertools.com/store/product/6-mm-x-30-mm-up-spiral-flat-router-bit
Instructions
🚨 be carful if you use a 8mm bit, you might run into the issue of cutting into your Plate. (6mm are recommended) 1. Select the scan with the corner grid. If you don’t have one -> make one. 😄 2. Place the file with the custom Anchor on the corner 3. Start cutting and make sure that you don’t run over the Stop line