Projector Screen Wall Bracket

By Jerad1

|

BY-NC-SA 4.0 License

|

Updated Tue Mar 02 2021

This is a prototype to hang a projector screen off the wall, this was for a 10g metal but it was mocked up in .25 plywood. I'll put both slip plates in here but only use the .125 for metal.

20 min

Easy

9

Decor

Files Included (3)

Bracket .125.svg
1 kB
Bracket p2.svg
2 kB

Wall Bracket p1.svg

2 kB

Materials

1/4 " plywood,

Tools

1/8 or 1/16 in tool

Instructions

If you were doing this out of plywood, do not go all the way through your bracket aligning slots.