Designed to perfectly accompany your Bench Brush, this dustpan is made with sculpted, laminated hardwood. Follow along with Aspen's Masterclass to learn how to laminate curved forms using Origin, and to grow your skills with spokeshaves, rasps, and files, and scrapers.
81
Tools
Base - Long.svg
Base - Short.svg
Bending Form A.svg
Bending Form B.svg
Side Profile.svg
Bending Form:
(4) 3/8" x 2" dowel rod
(3) 9" x 6" x 3/4" MDF
Base:
(1) 8" x 5.25" x 3/16" hardwood (cherry preferred)
Lamination Strips:
(4) 8/4 x 8" x 1/16" hardwood (cherry preferred)
Optional:
3/8" dia. brass tube
Shaper Origin
Shaper Workstation
1/4" up-cut router bit
1/16" rabbeting bit
Quick-Grip clamps
Brass miniature clamps
Chisel
Spokeshave
Rasp
File
Card Scraper
Sandpaper
Follow along with the linked Masterclass for detailed instructions! https://www.shapertools.com/en-us/masterclass/aspen-golann Instructions for the Bench Brush can be found here: https://hub.shapertools.com/projects/616ddf7e65b097001bc83f44 Additional notes: - Save material by placing both the A-side and B-side of your bending fixture on each piece of MDF - Stack three pieces tall to create each side of the fixture, allowing you to laminate up to 8/4 strips - Rabbet the bottom of each bent side with the side attached to the bending fixture, for best stability and safety
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved