Makita XTR01 cordless router foam cutouts
You can use this file to create your own Makita XTR01 inserts for toolboxes or drawers. This file contains cutouts for the Makita XTR01 cordless router, a single 4.0/5.0 Ah LXT battery, the edge guide, and the collet wrench. The design is based on a 50mm thick bed of foam, maximum cut depth is 45mm. I optimized the file for Autopass, so there's no need to change the inside cuts to pocket cuts while cutting.
3
Storage & Organization
Files Included (1)
Makita XTR01 - 50mm foam - Depths.svg
307 kB
Materials
Foam of your choice, 50mm thick
Tools
-CNC machine with tooling appropriate for cutting foam
Instructions
The insert shown is for a T-Loc SYS-2, in a SYS3 you would probably have to use an M 187 for depth. The deeper router and battery cutouts are designed for longer 8mm router bits. The shallower cutouts are designed around 1/4" tooling. The encoded depths in Shaper Studio don't transfer to the SVG, so I've included sections of the foam, the router barrel, and the base for reference to set your own depths, as well as annotations on the accessories.