Systainer Inlay variation
By Dr.BuckyLab|BY-NC-SA 4.0 License|Updated December 13th, 2020
based on Sam's design I made a few adjustments to create a bit more space in the systainer - I have placed the wrench, the angle guide and the support beams upright
1 hr
Intermediate
188
Files included (1)
Foam insert from the systainer
I used a 6 and a 8mm router bit
for the support beams I have cut all the way trough - I used a knife till I figured out that you can also mirror the file to cut from the other side as shown in the video from Sam cutting out the tape pockets. Feel free to modify as you want