ButtonFix (R) Type1 Flush mount integration
For anyone using the ButtonFix(R) fixings for removable assemblies, this is the pocket shape that needs to be routed to get the Type1 Fitting to flush mount in a panel. Optionally, you can only route the oval shape to have the fitting sitting on the circumference. I have no relation to ButtonFix(R), am just using their stuff when it is convenient.
20
Jigs & Fixtures
Files Included (1)
ButtonFix_Type1_FlushMount_wGuides.svg
6 kB
Materials
min. thickness: 10mm recommended.
Tools
8mm router bit (max 12mm to keep corned radius)
Instructions
I wanted to keep the fit very flush. I needed to route the final pass with a "-0.5mm" offset (larger than the file) for both pockets. This gave me a very flush fit. For depth settings (guides in file): - inner oval: min. 8mm ( I prefer 9mm to have some room) - outer shape: min. 3mm ( I prefer 3.5mm)