KR-KBK-IP Kreg Klamp Plate Template

Instructions

Place the template file onto your workbench top and rotate it if necessary 1. Cut the square pocket with a bigger router (I used 20mm but 6 or 8 would work as well) to a depth of 6,4mm 2. Cut the long hole pocket with the same router to a depth of 15mm 3. Cut the inner line of the square to its final shape with a 3mm router to a depth of 6,4mm 4. Cut the 4 screw holes with the same 3mm router to your preferred depth (I used 15mm as my workbench top is 25mm thick to give the drill bit enough guidance when using screws with nuts underneath)