Festool table

By mr_MW | Created January 2nd, 2021 | Published January 6th, 2021 | Updated January 6th, 2021

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
Festool MFT

40 min

Easy

5

Category

Other

Files included (1)
NameSize
Festool tafel.svg
7 kB

BY-NC-SA 4.0 License


18 mm MDF
6 mm cutter
The holes in the SVG are OUTSIDE cuts so you have to change them in The Shaper Origin to INSIDE cut. Firts make the hole without offset and than once more with minus 0,1 mm for a clean result. Start the grid at 70 mm x 70 mm. The end result is the exact size of the MFT.