Knife Scales
Wooden knife scales to fit a Rockler/Sarge folding knife kit.
40 min
Easy
16
Outdoors
Files Included (2)
Knife Scales Rev A.ai
88 kBKnife Scales Rev A.svg
26 kB
Materials
1/4" Mahogany
Tools
Shaper Origin, Hand Drill, Sand Paper
Instructions
Use the included engraving bit to create chamfers and grooves at a depth of your liking. The scales should be 0.10" tall so you will have to mill down to that depth or use thinner material. The chamfer depth is 0.07", the groove depth is 0.03", and the internal slot is grooved all the way through with a .005" internal offset. The screw countersinks are 0.03" as well. Knife kit can be found here: https://www.rockler.com/large-liner-lock-knife-kit