Incense Holder
By Schuyler|BY-NC-SA 4.0 License|Updated November 14th, 2020
Wooden sculptural design used to hold incense while it burns. Inspired by a few others seen like it online.
30 min
Easy
133
Files included (2)
8" x 8" x 3/4" Hardwood
Shaper Origin, Spindle sander, Hand drill
1/4" Stock Shaper Endmill. Offset as recommended till final pass. Two layers of blue tape and superglue used to hold the workpiece while cutting. Use a 0.001" drill bit and hand drill to put a hole at an angle of your choosing all the way through the wood so you can poke out the unburnt end of the incense.