SawStop Router Lift Cutout
Cutout for the SawStop router lift.
20 min
Easy
2
Jigs & Fixtures
Files Included (1)
SawStopInsert.svg
953 B
Materials
A router table that needs a hole in it for your SawStop insert.
Tools
Just Origin
Instructions
FIRST, Cut with 1/2" offset all the way through your table. THEN, cut with 1/4" and eventually 0 offset. If you do it the other way you end up climb-cutting the first couple of passes, which is uncomfortable at best. Use tape -- you need to keep the inside of the cutaway in place or it's a real challenge to keep Origin level while you're cutting away the rabbet for the insert. Yes, firsthand experience.