Sys Fräser Depot 2.0

By Alois1
|
BY-NC-SA 4.0 License
|
Updated Sat Jun 28 2025

Mini Systainer Fräser Depot mit 2 Ebenen. obere Ebene komfortable mit dem integrierten Griff herausnehmbar. Mini Systainer cutter depot with 2 levels. Upper level can be comfortably removed with the integrated handle.

1 hr 30 min
Easy

2

Systainer Inserts

Files Included (3)

  • Einlage_Griff.svg

    1 kB
  • Einlage_Oben.svg

    19 kB
  • Einlage_Unten.svg

    44 kB

Materials

4mm Sperrholz,

Polyethylen PE Schaumstoff 100x50x2cm, schwarz

you can order Schaumstofflager.de (look Photo)

Tools

Instructions

eine 4 mm Sperrholzplatte auf einem 2 cm PE Schaumstoff aufleimen dem Griff aus einem 8 mm Holz ausfräsen den Schaumstoff bis zum Grund ausfräsen und Griff einleimen. die Untere Ebene ist ebenfalls 2 mm Schaumstoff. die Außenkontur der oberen Ebene ist etwas kleiner. die Frästiefe individuell an die Fräser anpassen. made a 4 mm plywood with glue on a 2 cm PE foam Mill out the handle from 8 mm wood, mill out the foam to the base and glue in the handle. the lower level is also 2 mm foam. the outer contour of the upper level is slightly smaller. Adjust the milling depth individually to the milling cutter.


Made by Shaper Tools

© ShaperHub & Shaper Tools, Inc. all rights reserved